KIT Mifare Card RFID Reader Writer AND Key Tags Keyfobs Token NFC TAG Keychain 13.56MHz Arduino Android Robots NEW
Module No.: TB190
1 x NFC TAG Keychain;
1 x RFID module;
No include arduino UNO
Description RFDI Key:
Main Chip: Philips Mifare 1 S50;
Storage capacity: 8Kbit, 16 partitions, each partition with 2 group passwords;
Size: 30 * 40 * 3mm;
Operating Frequency: 13.56 MHz;
Communication speed: 106K Boud;
Read and write distance: 2.5 ~ 10cm;
Read and write time: 1 ~ 2ms;
Operating Temperature: -20 ℃ ~ 85 ℃;
Endurance:> 100,000 times;
Description RFID module:
MF RC522 is a highly integrated transmission module for contactless communication at 13.56 MHz.
This transmission module utilises an outstanding modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz.
Operation Current 13~26mA/DC3.3V
Idle Current 10~13mA/DC3.3V
Sleep Current <80μA
Peak Current <30mA
Operation Frequency 13.56MHz Read Range 0~60mm（mifare1）
Interface SPI Data Transition Rate Up to 10Mbit/s
Support Cards mifare1 S50 mifare1 S70 mifare UltraLight mifare Pro mifare Design
Operation Temperature -20~80℃
Relative Humidity %5~%95 Notes
Card compatiability : mifare1 S50、mifare1 S70、mifare UltraLight、mifare Pro、mifare Desfire ;
The MFRC522 transmission modules support the following operating mode:
Reader/writer mode supporting ISO 14443A / MIFARER
The RFID Module with the Philips MF RC522 chip is used for RFID products development.
The Module supply voltage is 3.3V,users can connect the module to any CPU board with the SPI interface.
Enterprise / campus card, bus stored value card, express way fees, parking, district management,attendance systems, patrol system, enterprise systems, access control systems, radio frequency identification field and so on.