Gallery

SN754410 H Bridge Motor Driver stepper motor 1A compatible L293D

SN754410 driver motor 1A chiosz robots 2 SN754410 driver motor 1A chiosz robots 3 SN754410 driver motor 1A chiosz robots 4 SN754410 driver motor 1A chiosz robots 5 SN754410 driver motor 1A chiosz robots

Our ChiOSZ Products

SN754410 Motor Driver ( L293D )

SN754410 H Bridge Motor Driver stepper motor 1A compatible L293D Arduino Projects Robots NEW
The SN754410 is a quadruple high-current half-H driver designed to provide bidirectional drive currents
up to 1 A at voltages from 4.5 V to 36 V. The device is designed to drive inductive loads such as relays,
solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-
supply applications.
All inputs are compatible with TTL-and low-level CMOS logic. Each output (Y) is a complete totem-pole driver with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled and their outputs become active and in phase with their inputs. When the enable input is low, those drivers are disabled and their outputs are off and in a high-impedance state. With the proper data inputs, each pair of drivers form a full-H (or bridge) reversible drive suitable for solenoid or motor applications.
A separate supply voltage (VCC1) is provided for the logic input circuits to minimize device power dissipation.
Supply voltage VCC2 is used for the output circuits.
The SN754410 is designed for operation from −40°C to 85°C.
Include:
1 x SN754410

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s