Gallery

1.44″ Red Serial 128X128 SPI Color TFT LCD Module Display screen

screen 1.44 TFT LCD chiosz robots 2j

screen 1.44 TFT LCD chiosz robots 3j

screen 1.44 TFT LCD chiosz robots 4

screen 1.44 TFT LCD chiosz robots 4j

screen 1.44 TFT LCD chiosz robots j

Our ChiOSZ products

TFT 1.44 lcd schematic PDF

ILI9163 TFT LCD controller PDF

1.44″ Red Serial 128X128 SPI Color TFT LCD Module Display screen Arduino projects robots NEW

1.44-inch screen with SPI serial backplane module, a minimum of only four IO-driven resolution 128 * 128

Size: 1.44 inch SPI serial bus

Resolution 128 * 128

Size: 1.44 inch
– Resolution:128 * 128

Instructions

Program default IO connections:

sbit LCD_CS = P0 ^ 0; Chip Select
sbit LCD_RS = P0 ^ 2; data / command switch
sbit LCD_SDA = P1 ^ 5; Data
sbit LCD_SCK = P1 ^ 7; Clock
sbit LCD_REST = P0 ^ 1; Reset

TFT Power: Screen Power is 2.8-3.3V; remember not to use 5V
(Modules with PCB’s have inherited 3V regulator IC, you can enter 5V)

backlight power supply (LED pin): 3.2V maximum backlight power
(At 3.3V supply can be connected in series for 10 ohm current limiting resistor in series with 100 ohms or 5V Resistance).

Data port level: theoretically can not let the data port level exceeds 3.3V, if you must
IO connection with 5V microcontroller data bus, as tft internal voltage clamp, with
Can be used, but is not always standard. You can do an experiment to test a sample batch
Made product, in order to improve product stability, better use of low-voltage monolithic
Machine or add a level converter IC.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s